Place your Vapor Daddy or Deluxe Daddy on a stable hard and flat surface. Make sure the vents on the bottom are free from being blocked. Plug your unit into a safe outlet. Turn the heating knob to the highest setting and allow your vaporizer to warm up for at least 5 minutes.
Using The Wand (TV-W11) DELUXE DADDY WAND
The wand used with the Deluxe Daddy is a “hands free”, glass-on-glass wand. The “hands free” allows for ease of use while vaporizing. The screens are easily replaced by unscrewing the metal discs, and popping the screens out. The included poker can also help remove the screens. Your wand is also easily filled with vapor material by placing the material in the smaller wand piece (TV-W112).
Do not overfill the wand piece. It is OK to fill the wand piece to the top of the metal disc, but do not pack down. Once filled, screw the metal discs back together. To get the full vaporizing potential out of your vapor material, it is a good idea to grind them up before placing them in the wand. This will increase the surface area and allow for the heat to pass by your vapor material. Load enough vapor material to cover the screen and fill chamber midway to full capacity. Remember that you don’t need as much vapor material as you do with conventional smoking to experience the same effects.
Emptying The Deluxe Daddy Wand When Finished
When finished, you can carefully unscrew the metal discs and pour your product into a tall fireproof container. You can also use a poker to help loosen the vapor material out of the wand pieces. Be careful when unscrewing the discs, as they will be hot from the heating element. Wait for the discs to cool before emptying the wand out.
Emptying The Vapor Daddy Wand When Finished
When finished, you can carefully tap the wand on the back of your hand, or with the middle of the hose. You can also use a poker to help loosen the vapor material out of the wand pieces. You can also blow air out of the wand into a tall fireproof container. Be careful when tapping the wand, as it will be hot from the heating element. Wait for the wand to cool before tapping the wand out.